LISEO Air tight L51, Инструкция по установке и эксплуатации

Страница: 16 / 18

INSTALLATION AND USE MANUAL
5.3.
FIRST LIGHTING
In the first lighting, you are advised to proceed with caution and use fine and dry
wood.
Place the primary air input fully open (see figure). DO NOT USE under any
circumstances: alcohol, gasoline or any other explosive flammable substances.
During the first lightings, it could release fumes or unpleasant odors caused by the drying
of the paint; it is not hazardous, it's just necessary to ventilate the room. Once combustion
is performed regularly, introduce wood pieces of normal size.
When you open the door, do it slowly to avoid returns of smoke in the room.
Never load the fireplace with excessive wood (see technical data).
During use, the metal structure, the handles and the glass reach hot
temperature; therefore, use proper thermal protection for handling.
During normal use, keep the fireplace's door always closed completely.
5.4. COMBUSTION CONTROL
The regulation is in the front (
see figures).
Moving the control (
see figures), we reduce or increase the quantity of air
which contribute to combustion.
PRIMARY AIR air input from the bottom.
SECONDARY AIR air input from the back (deflector).
GLASS CLEAN AIR prevents the glass from getting dirty during combustion.
Once reached the good regulation, preferably left it fixed
Once the flame in the stove is well underway, move the air
primary lever to “minus”. In this condition, the primary air input
is reduced and the air flow passes to the second combustion, so
we can regulate the desired power of combustion.
5.5.
EMERGENCY SITUATIONS
If, for any reason, you have to quickly extinguish the fire of the fireplace or intervene in a fire trapped in
the flue pipe, act following the proposals below:
Always leave closed the appliance door,
Close the air inputs,
Request urgently the intervention of the competent organisms.