LiquoSystems iFerm Nano Tank, Руководство по эксплуатации, Страница: 21 / 32

21
2017-07
Operation
Subject to change. |
¨
Start operation:
–
Set the desired target temperature, see “5.2 Setting
the target temperature” on page 21 .
–
Start up the production process in the usual way.
¨
Check iFerm Nano Tank at regular intervals to ensure
correct operation.
5.2 Setting the target temperature
PV
SV
«
PF
«
«
‹ ‹
19.7
20.5
C
The correct setting of the desired target
temperature is the only action that
you must perform during operation
of iFerm Nano Tank .
¨
Check the setting at regular intervals.
/
¨
Lower or increase the target temperature
(SV area) by 0.1 degrees with each press of
the button.
Or
/
¨
Activate fast forward to make greater value
changes.
Information
Alarm threshold SUB3
In the case of a greater value change, this message
indicates that the actual temperature deviates from
the target value by more than 1.5 K. The message
disappears as soon as the difference between the
actual and target values is once again less than 1.3 K
(set hysteresis 0.2 K).
EN
EN
EN
EN
EN
EN
EN
EN