Liquid Controls LectroCount LCR 600, Инсталляционные компоненты

Страница: 22 / 78

Installation
Installation
If the LectroCount LCR 600 was ordered as part of a meter system, it will arrive mounted on the meter
and prewired to
the ETVC probe, air eliminator, and valve.
Installation overview for LCR 600 ordered with meter system:
1. Ground truck seat cushion. See LectroCount Ground Strap Kit . (p12)
2. Install meter system onto truck or fixed installation. Refer to the Meter manual.
3. Run the data and power Cables from the LCR 600 to the truck cab or power supply. See Routing
LCD 600 Data and Power Cables .
4. Connect any additional components to the LCR 600 CPU board.
5. Mount printer and connect printer data cable. See Printers .
6. Connect the LCR 600 and the printer to power supply. See Power Supply .
7. Setup and calibrate the LCR 600. Refer to manual EM150-11.
If you are replacing an existing register, you must mount the register onto the meter and make the proper
connections
to all of the components.
Installation overview for LCR 600 ordered without meter system:
1. Ground truck seat cushion. See LectroCount Ground Strap Kit .
2. Mount the LCR 600 to the meter. See Mounting Overview .
3. Run the Data and Power Cables from the LCR 600 to the truck cab or power supply. See Routing
LCD 600 Data and Power Cables .
4. Connect all components to the LCR 600 CPU board.
5. Mount printer and connect printer data cable. See Printers .
6. Connect the LCR 600 and the printer to power supply. See Power Supply .
7. Setup and calibrate the LCR 600. Refer to manual EM150-11.
Check Each Shipment
Before installation, check your shipment against the packing list and ensure that no parts are missing.
The packing list is inside the red information packet along with the Installation and Operation Manuals.
This Guide Includes
24
37
66
70
24
29
37
66
70