Liquid Controls Avery-Hardoll BM Series Скачать руководство пользователя страница 16

Страница: 16 / 75

TP0003B

BM METER

Chap 2

Page 3

TECHNICAL DESCRIPTION

BODY ASSEMBLY

3.1

The body assembly comprises a body casing with front and rear double end covers. The body casing

of NI-resist cast iron forms the metering compartment and is machined internally on two concentric

diameters which are joined by blending radii. The larger diameter forms the measuring crescent

(Figure 2.2) and the blending radii are machined out to form the inlet and outlet ports.

3.2

The body casing is fitted with pressure balanced inner end covers, the inner covers are of NI-resist

cast iron while the standard outer covers are of aluminium, NI-resist cast iron is available as an

alternative. The volume between them is fluid filled at line pressure, this ensures that there is no

pressure difference across the inner covers of the measuring chamber and therefore, no distortion.

3.3

A bearing is housed within each inner cover to provide support for the rotor assembly. A bearing

adjuster, screwed into the front inner cover and a compensating spring between the rear bearing and

rear outer cover enables the position of the rotor assembly, within the body, to be adjusted. The front

cover is drilled to allow the calibrating drive spindle to pass through, a spindle seal fits in the outer

cover. The outer face of the outer front cover is designed to allow the calibrating mechanism to be

secured to it. An optional factory fitted cover incorporating a pulse transmitter unit for electronic

calibration/metering measuring is also avaiable.

FIG 2.2 BULKMETER OPERATION

INLET MANIFOLD

BODY CASING

CARBON VANE

ROTOR

MEASURING

CRESCENT

STAINLESS STEEL ROD

PRODUCT

FLOW

S13611

DYNAMIC SEALS

4.1

A dynamic pressure tight seal is fitted within the front cover. Seal material can be either Nitrile or

Fluorocarbon depending on the product in use. See below for a guide to suitable seals:

Products suitable for use with NITRILE SEALS

Kerosene (without additives)

Diesel

Heavy black oils

Jet A1

Содержание Avery-Hardoll BM Series












































































Результаты поиска

Содержание Avery-Hardoll BM Series

Отзывы:

Похожие инструкции для Avery-Hardoll BM Series

Бренды по названию

Популярные бренды

Liquid Controls Avery-Hardoll BM Series, Руководство по обслуживанию и список запасных частей

Результаты поиска

Содержание Avery-Hardoll BM Series

Отзывы:

Похожие инструкции для Avery-Hardoll BM Series

Бренды по названию

Популярные бренды