Lippert Stargazer Spirit XTR Skylight Скачать руководство пользователя страница 2

Rev: 09.28.22

Page 2

CCD-0006512

Introduction

The Stargazer Spirit XTR Acrylic Window Skylight can be installed on the roof of a unit to provide ventilation 

and allow sunshine in while providing privacy. The inner screen frame options allow for different types  

of ventilation and guards against pests. The inner screen assembly is a combination of a flyscreen and shade 

for windows that can be pulled across the skylight opening by hand using the two different profiles.  

The integrated spring shaft tensions the fabric permanently and gives optimum hold. The Stargazer Spirit 

XTR Acrylic Window Skylight is positioned front to rear of unit and is designed for a flat interior roof. For 

information on the assembly or individual components of this product, please visit:  

https://support.lci1.com/skylights

NOTE:  Images used in this document are for reference only when assembling, installing and/or operating 

this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

Failure to follow instructions provided in this manual may result in death, serious personal injury 

and/or severe product and property damage, including voiding of the component warranty.

The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause 

death or serious personal injury if not performed safely and within the parameters  

set forth in this manual. 

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions, 

i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This 

manual cannot begin to plot out instructions for every possibility, but provides the general instructions, 

as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the 

provided instructions may result in death, serious personal injury, severe product and/or property damage, 

including voiding of the Lippert limited warranty.

TABLE OF CONTENTS

Introduction 

2

Safety 

2

Resources Required  

3

Prior to Installation 

3

Installation 

4

Skylight Roof installation 

4

Skylight Inner Screen Ceiling Trim and Frame 

4

Operation 

5

Skylight Open Position 

5

Skylight Closed Position 

6

Maintenance 

7

Notes 

7

All windows must be fully closed prior to travel. Failure to close windows prior to

travel could result in product and/or property damage.

Содержание Stargazer Spirit XTR Skylight









Отзывы: