TME-CLR-ECO-R0V6.docx
Rev 0.6
Page 4 of 34
1.3
Specifications
Electrical Specifications
Supply voltage
+5 V DC, +12V DC for LVDS backlight only if needed
Rise time
< 10 ms
Supply voltage tolerance
± 5% *
Inrush current
typical 2.0 A
Supply current
maximal 2.4 A depending on operating system and connected peripherals **
typical 1.4 A (Windows XP idle mode)
* Voltage must be measured on the board, not at the power supply
** only monitor, mouse and keyboard are attached. Additional peripherals rise up current.
Environmental Specifications
Operating:
Temperature range
0 … 60 °C (standard version,
models with part numbers 7xx-xxxx-xx
)
-20 … 60 °C (industrial version,
models with part numbers 8xx-xxxx-xx
)
-40 … 85 °C (extended version,
models with part numbers 9xx-xxxx-xx
)
Temperature change
max. 10K / 30 minutes
Humidity (relative)
10 … 90 % (non-condensing)
Pressure
450 … 1100 hPa
Non-Operating/Storage/Transport:
Temperature range
-40 … 85 °C
Temperature change
max. 10K / 30 minutes
Humidity (relative)
5 … 95 % (non-condensing)
Pressure
450 … 1100 hPa
Mean Time Between Failures
MTBF at 25°C
333,291 hours
1.4
Mechanical
Dimensions (L x W)
90.2 mm x 95.9 mm
Height
max. 14.3 mm on top side above PCB with CoreExpress-ECO and heat
spreader
max. 5.0 mm on bottom side below PCB at Mini PCI Express connector
Weight
150 gr. with CoreExpress-ECO and heat spreader
Mounting
4 mounting holes according to PC/104 specification
4 mounting holes for CoreExpress ECO
Note It is strongly recommend using plastic spacers instead of metal spacers to mount
the board. With metal spacers, there is a possible danger to create a short circuit
with the components located around the mounting holes.
This can damage the board!
