9
lippert.com
432-LIPPERT (432-547-7378)
Rev: 10.13.21
Screen Assist
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004313
Fixed Push Bar Operation
1.
The fixed push bar can be used as needed to assist in
opening or closing the screen door in conjunction with the
existing screen door handle.
X”
B
A
cross bar
Fig.26
center of raised
portion of
screen door frame
X”
A
B
cross bar
Fig.27
center of raised
portion of
screen door frame
Completed Fixed Push Bar to Door Installation
1.
Determine a preferred height for mounting the fixed push
bar Screen Assist.
2.
Measure from the top of the crossbar to the top
hole in the mount bracket on each side of the push bar
(Fig.27, Fig.28)
. Ensure the measurements are identical on
both sides so that the bar is installed level to the door.
3.
Mark the location of the top holes in the center of the
raised portion of the screen door frame
(Fig.27, Fig.28)
.
NOTE:
If a sliding panel is present on the door, ensure that
it is out of the way during the Screen Assist installation to
avoid any accidental damage to the sliding panel. If the
sliding panel is all the way to the hinge side or non-hinge
side of the door, damage from installing the bracket will
occur.
4.
Using a cordless or electric drill or screw gun, install the
top screws into the mount bracket
(Fig.27A, Fig.28A)
.
5.
Install the bottom screws
(Fig.27B, Fig.28B)
. The
Assembly is now complete.
5.
Move the assembly to a stable work surface and install
the sleeves to the marked dimensions using the provided
screws
(Fig.26)
.
NOTE:
Ensure that care is taken when measuring and
fastening the push bar to the sleeves. The screw creates
a hole in the bar, and once installed, small adjustments
cannot be made.
Fig.28
