6
lippert.com
432-LIPPERT (432-547-7378)
Rev: 10.13.21
Screen Assist
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004313
insertion line
Fig.14
Completed Lever Push Bar to Door Installation
1.
Insert the lever side sleeve up to the insertion line on the
inside push bar lever handle
(Fig.15)
. The sleeve should rest
at the insertion line on the lever handle.
NOTE:
If a sliding panel is present on the door, ensure that
it is out of the way during the Screen Assist installation to
avoid any accidental damage to the sliding panel. If the
sliding panel is all the way to the hinge side of the door,
damage from installing the bracket will occur.
5.
Move the assembly to a stable work surface and install
the sleeves to the marked dimensions using the provided
screws
(Fig.14)
. The push bar is now complete.
NOTE:
Ensure that care is taken when measuring and
fastening the push bar to the sleeves. The screw creates
a hole in the bar, and once installed, small adjustments
cannot be made.
Fig.15
screw
screw
Fig.16
Fig.17
crossbar
mount
bracket
center of raised portion of
screen door frame
parallel
2.
Mount the bracket on the screen door to the center of
the raised portion of the screen door frame
(Fig.16)
.
NOTE:
As a guide during installation, the bottom of the
mount bracket will rest near the top of the mid-door
crossbar and the push bar should be parallel to the
crossbar
(Fig.13)
. Adjust as needed.
3.
Using two of the supplied screws secure the mount
bracket to the screen door.
(Fig.17)
. The assembly is now
complete
Lever Handle Push Bar
Operation
To operate the Screen Assist, push down on the lever
handle push bar to unlatch the door.
