manualshive.com logo in svg

Lippert Components Solera Hybrid, Руководство пользователя, Страница: 11 / 16

Поделиться
Скачать
Lippert Components Solera Hybrid Скачать руководство пользователя страница 11

11

lci1.com      

574-537-8900    

 

Rev:  03.19.18

Solera

®

 Universal Hardware

Manual Awning to

Solera Hybrid Awning

(For Aftermarket Applications)

CCD-0001269

Operation

NOTE: 

If the unit is equipped with a locking latch, be sure 

to unlock the latch prior to extending the awning.  After 

retraction and before travel, be sure to lock the support 

arms back into place.

Extending the Awning

1. 

Locate the crank handle for the awning 

(Fig.27A)

.

2. 

Insert the hook end of the crank handle into the eye bolt 

on the drive head 

(Fig. 26A)

.

3. 

Turn the crank handle so the eye bolt rotates in a 

clockwise direction and fully extend the awning.

NOTE: 

Keeping the handle as parallel to the support arm 

assembly as possible makes it easier to turn.

NOTE: 

Extension is considered complete when the fabric 

is completely unrolled, the valance is hanging down from 

the roll tube and a section of the roll tube is exposed 

(Fig. 28)

. 

TYING THE ROLL TUBE DOWN ONCE THE 

AWNING IS EXTENDED WILL NOT ALLOW THE 

FREE FLOATING  SUPPORT ARMS TO WORK AS 

DESIGNED AND MAY CAUSE DAMAGE TO THE 

AWNING OR UNIT.

Fig.26 

Fig.27 

Fig.28 

 A

roll tube

drive head

fabric 

polycord

fabric

valance

valance 

polycord

 A

Содержание Solera Hybrid

















Отзывы:

Нет отзывов