Rev: 06.13.18
Page 8
CCD-0001435
Syncing the RVLock handle with your Keypad or Remotes
1.
Lightly press the learning button with a paper clip through the pin hole located under the interior
handle. A beep will confirm that you have entered the programming mode.
2.
Now repeat pressing the lock button on your remote until the handle confirms with a series of rapid
beeps (usually takes one or two times). If you have a keypad, repeat typing in your numeric code and
pressing the lock button until the handle confirms with a series of rapid beeps (usually takes one or
two times).
A.
Default code for all new keypads is 1234. If you would like to change your keypad code see
“Programming a new code into your RVLock Keypad" after completing this “syncing” process.
B.
If programming did not work or if you have additional remotes to program, repeat steps 1 and 2.
C.
You can have both a keypad and multiple remotes operating the same or multiple RVLock
handles.
Keypad Programming Instructions
3.
While holding the “0” button, press and release the “lock” button (Fig. 1). You will hear a long
confirmation beep – entering programming mode.
4.
Type in the existing code, in this case, the default code, “1234”, then press lock (Fig. 2).
5.
Now type in your new code (up to 8 digits), press lock.
6.
Again type in your new code and press “lock”. (A long confirmation beep confirms and completes
programming.)
A.
The keypad comes from the factory with the default code of “1234”.
B.
Remember, we removed the “backup” reset code/button. You must have the current code to
change to a new code. There is no reset button or override code.
Fig. 1
Fig. 2
RVLock Handle Programming Instructions
1.
Power up the RVLock handle.
2.
Using a paperclip, lightly press the learn button located through the pin hole on the rear of the handle
next to battery cover (Fig. 3). You will hear a short confirmation beep.
3.
Press the lock button on the Key Fob (Fig. 4). Repeat this process until long set of beeps confirms and
completes programming, usually 2 times.
Fig. 3
Fig. 4
Lock Button
Lock Button
Learn Button
