Operator manual Konstanz STG/ASA 14/20 Version 8.0 (01/2010)
4.6
Travel with the platform lift
(standard design)
Make certain before every trip that the acoustical and if present, the visual (option)
warning signals are functioning. The following control elements are located on the
platform:
a) Key switch Function -I- and -0- (
S.7.8/item.2
)
b) Control part Function UP and DOWN (
S.7.8/item1
)
c) Push button EMERGENCY-OFF (red button) (
S.7.8/item.
3)
After inspecting or accessing the platform, insert the key and turn to position -1-.
!
In the case of the
automatic
platform the safety gates close electrically if the
pivoted lever or button is pressed and held in the travel direction. The
platform lift begins moving after the gates are closed.
!
In the case of a
manual
platform
first
close the safety gates manually
(horizontal position), then press and hold the pivoted lever or button in the
desired travel direction.
Upon reaching the target stopping point:
!
The platform lift stops automatically ( the respective position is set during
assembly).
!
For the automatic platform, hold down the pivoted lever or the button until the
safety gates have opened.
!
For the manual platform, release the pivoted lever or button and open the safety
gates upward by hand.
Travel with the platform lift
(Special design 1) [using the external control device,
with key switch with 3 settings (S.7.8 item 2) for travel with opened platform via
the external control device]. This option must be activated by a technical specialist
within the control system. It must be ensured that no third person can land/spring in
the travel route.
Condition: Travel area is 100% visible !!!!
The key switch (S.7.8 item 2) should be set to position -II-, otherwise as described in
the standard design, with the difference that here only the external control device is
used.
Travel with the platform lift
(special design 2)
The key switch (S.7.8 item 2) should be set to -I-, otherwise as described in the
standard design.
4.7
What is to be done in the event of an unexpected downtime such as a power
failure?
We recommend installing a functional cell phone for contacting rescue workers.
