manualshive.com logo in svg

Lipman Nurit 3010, Руководство пользователя, Страница: 81 / 94

Поделиться
Скачать
Lipman Nurit 3010 Скачать руководство пользователя страница 81

082-32-001

68

NURIT /3010 

 User Manual

 

Printer does not function properly

•

 

Check that the paper has been fed to the printer properly (underhand).
See the figure and instructions in Appendix C.  The NURIT /3010
uses thermal paper 

only

.

•

 

Check there is paper in the printer compartment. Replace if required.

•

 

If printer continues working even though the paper has been used up,
check that the ‘end of paper’ detector in the printer mechanism is not
blocked by a torn piece of paper.

 

Card reader not working

•

 

Make sure that card has been swiped so that its magnetic strip is
facing downward and to the right side of the terminal.

•

 

Be sure to swipe card from back to front of the terminal.

•

 

Contact the technical support help desk.

 

Possible PIN pad error

•

 

Verify that the PIN pad is properly plugged into the PIN connector on
back of terminal.

•

 

Check the line to the PIN pad itself.

 

Receipt prints “CANCELED”

•

 

The terminal will display a host response, or some type of error
message, as to why the transaction was canceled.

Содержание Nurit 3010































































































Отзывы:

Нет отзывов