Lipco UF 100, Перевод оригинальной инструкции

Страница: 19 / 28

Instructions Reversing Harrow UF 70/80/90/100 _ 70L
19 - 28 110030-11-EN BA UF 70_80_90_100 UF 70 L / 29.06.2020
•
Lubricate the drive flange once a month via the lubricating nipple
provided especially for this purpose and then turned once to allow
the grease to become distributed!
•
Make sure it runs smoothly.
•
Remove drive flange once a year, clean and regrease it.
•
Lubricate the overload coupling (star ratchet) and universal joint
shaft of the drive every 8 operating hours and after a longer
standstill! (Fig. 12)
Protective hood opened.
Lubricating nipple (3x)
Fig. 12
•
Check the level of lubricant in the chain drive via the corresponding
plug (Fig. 11). Make the check, when the machine has already
been running for a few minutes. This ensures that the grease has
warmed up and is distributed evenly. Then check the grease level
with a dipstick (grease level should be at least 5 cm, measured
from the lowest point of the chain case to ensure that the chain is
always sufficiently lubricated).