Lionelo Ruben, Руководство пользователя

Страница: 10 / 92

‑ 10 ‑ EN
1. Putting the batteries into the main model: As shown in the picture
below, loosen the screw with a Philips screwdriver, then remove the
battery cover and put the batteries into the battery compartment paying
attention to the correct polarity. Then place the cover back and fasten
the screw. Use the same steps in order to remove the batteries (fig. 11).
A. Place the positive poles of the batteries so that they face the „+”
signs inside the battery case
B. Place the negative poles of the batteries so that they face the „-”
signs inside the battery case
C. Close the battery case and lock it with the screw
2. Main power supply First plug the adaptor’s cord into an AC socket
(100-240 V ~ 50/60 Hz 0,2 A max), as shown in the picture below.
Then, insert the other end of the cord into the DC port on the main unit.
WARNING
1. Do not charge non-rechargeable batteries.
2. Rechargeable batteries can only be charged under adult supervision.
3. Rechargeable batteries should be taken out of the toys before charging.
4. Different types of batteries or old and new batteries cannot be mixed.
5. The batteries should be placed in the correct polarity.
6. Exhausted batteries are to be removed from the swing.
7. Power supply terminals must not be short-circuited.
8. The adapter provided with this swing can be used to power the product. The input
voltage of an adapter should be 100-240 V ~ 50/60 Hz 0,2 A max. The output voltage:
5.8 - 6 V, 800 mA - 1 A.
9. The adapter should be placed away from a baby.
10. The transformers used with the swing must be regularly examined
for damage to the cord, plug, enclosure and other parts, and in the
event of such damage, they shall not be used.