6
Suspension bridge sections
To create bridges snap the suspension bridges section onto the top of the arches as shown.
You must use a ‘9 INCH TRACK’ between the Brick Arches when using bridge sections.
Note!
Stone arches
S
tone Arches are used to support elevated sections of track. Place a Stone Arch under each joint
section between the tracks and snap track into place as shown.
Stone Arches can also be stacked to create bridges or multiple levels of track. To stack the arches
simply place the base of an arch over the top of another arch to snap into place
To separate arches simple bend them at the joint to snap apart
1). Place edge
of track under tab.
2). Then snap
other edge down.
1). Push down.
1). Push down.
Lionel Little Lines PE.indd 6
12/29/09 1:54 PM
