6
TrainMaster Command Control operations
CAB-1 & CAB-1L Remote Controller commands
U
se
your CAB-1 Remote Controller to activate the sounds and operate the crane. Use the volume
control knob located under the roof to adjust the volume. If you want to silence the sounds,
turn the knob counter-clockwise to set the volume to zero. Refer to Figure 1 on page 3 for the loca-
tion of these controls.
Releases the ElectroCoupler on the rear of the
Crane car.
Releases the ElectroCoupler on the front of the
Crane car.
Lowers the Boom sounds.
Raises the Boom sounds.
Lowers the main hook on the Crane.
Lowers the small hook on the Crane.
Raises the small hook on the Crane.
Rotates the Crane cab.
Activates the horn sounds. Release the button
to discontinue the sound.
Raises the main hook on the crane.
