5
LCS BPC2 Module
T
he BPC2 module is designed to be connected to track power blocks on your model railroad
layout. Blocks are isolated track sections modelers use to help control multiple trains on
the same layout. Real railroads often use blocks as well. Theirs don’t control power to the
trains, but do separate the railroad into separate districts to keep trains safely spaced. These
blocks are often marked by signals.
LCS PDI CABLES
use either connector
AC Power
PROGRAM
A
U
A
U
BPC2
BLOCK
BLOCK
COMM
COMM
8
7
6
5
4
3
2
1
6-81640
Figure 2. LCS BPC2 Module
Wiring your railroad for blocks has several advantages:
• By turning off track power blocks when not in use, you can store additional trains and
reduce the draw on your power supplies in either conventional or command control.
• Installing breakers on separate blocks or loops can prevent a problem on one part of your
layout from shutting down the entire platform.
• Troubleshooting is much easier when you can identify a location where an electrical short
may be present.
• Multiple trains can operate independently on the same platform, even with conventional
control.
