Lionel Holiday Tradition Express, Руководство пользователя

Страница: 7 / 16

Creating your layout
Placing the train on the track
W ith the track set up and power connected, you are ready to put your train on the track.
1. Place the locomotive on the track first, making sure that all wheels are set properly on the
rails.
2. Place the coal tender behind the locomotive, lowering the coupler into position. See
Figure 5.
3. Plug the wire tether on the coal tender into the receptacle on the locomotive, just below the
rear of the cab. Refer to Figure 4.
The locomotive will not operate unless the wire tether between the locomotive and
tender is connected.
7
Figure 4. Locomotive and tender connection
Note!
The locomotive will not operate
unless the wire tether between the
locomotive and tender is connected.
To disconnect the wire tether for
storage, squeeze the latch on the
bottom of the connector and remove
the plug from the locomotive.
Tether
Coupler