T
o select a single operational state for your Lionel locomotive (for example, forward only),
you can deactivate the Command reverse unit’s sequencing function with the Command
reverse unit (PROG/RUN) switch.
Get your locomotive moving in the desired direction, then
slow it down without stopping.
Set the Command reverse unit switch to PROG. Refer to Figure 2 for the location of the
switch. The locomotive is now “locked” into your chosen direction.
When you no longer want single-direction operation, just slide the Command reverse unit
switch back to RUN.
Your locomotive’s reverse unit will “reset” to forward after any power interruption
lasting five seconds or longer, regardless of the original locked-out direction.
Locking your locomotive into a single operational state
Transformer operations
Note!
5
Smoke Unit
(see page 26 for
details)
Command reverse
unit switch
Odyssey switch
Figure 2. Switch locations
ON
OFF
RUN
PROG
ON
OFF
