manualshive.com logo in svg

Lionel GG1, Руководство пользователя

Поделиться
Скачать
Lionel GG1 Скачать руководство пользователя страница 4

Quick Start

Conventional transformer operations

Do not attempt to raise or lower the pantographs by hand.

Be sure to remove the paper bands from around the pantographs before you operate
the locomotive.

1. Place your locomotive on Lionel or Lionel-compatible O-72 or larger

track.

2. Power your locomotive at 8-19 volts with your alternating current (AC)

transformer.

Do not power your locomotive with a direct-current (DC) transformer. Damage to
sensitive electronic components may occur.

3. Wait three to eight seconds as your locomotive determines whether it is in

a conventional environment or a TrainMaster Command Control
environment. The pantographs will operate automatically.

4. Move ‘em out! Press the DIRECTION button on your controller, then

throttle up.

TrainMaster Command Control operations

Do not attempt to raise or lower the pantographs by hand.

Be sure to remove the paper bands from around the pantographs before you operate
the locomotive.

T

o operate your locomotive in the Command Control environment, you need a Command
Base (available separately, 6-12911) and a CAB-1 Remote Controller (available separately,

6-12868). These products are available together in the TrainMaster Command Set (6-12969).

1. Turn off track power and plug in the Command Base. 

2. Place your locomotive on Lionel or Lionel-compatible O-72 or larger

track.

3. Increase track voltage to full power or 19 volts AC. 

Do not power your locomotive with a direct-current (DC) transformer. Damage to
sensitive electronic components may occur.

4. Press ENG and 1 to address your locomotive with your CAB-1 Remote

Controller. The pantographs will operate automatically.

5. Throttle up and move ‘em out. 

4

Note!

Note!

Note!

Note!

Caution!

Caution!

Содержание GG1





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды