background image

Lionel Limited Warranty Policy & Service

T

his Lionel product, including all mechanical and electrical components, moving parts, motors and structural components, with 

the exception of 

LIGHT BULBS, LED’s & TRACTION TIRES

 are warranted to the original owner-purchaser for a period of 

one year from the original date of purchase

 against original defects in materials or workmanship when purchased through a 

Lionel Authorized Retailer*

.

This warranty does 

NOT

 cover the following:

• Normal wear and tear

• Light bulbs or LED’s

• Defects appearing in the course of commercial use

• Damage resulting from abuse/misuse of the product
Transfer of this product by the original owner-purchaser to another person voids this warranty in its entirety. Modification of this 

product in any way; visually mechanically or electronically, voids the warranty in its entirety. 

Any warranted product which is defective in original materials or workmanship and is delivered by the original owner-purchaser (this 

warranty is non-transferrable) to Lionel LLC or any Lionel Authorized Service Station 

MUST

 be accompanied by the original receipt 

for purchase (or copy) from an 

Authorized Lionel Retailer*

, will at the discretion of Lionel LLC, be repaired or replaced, without 

charge for parts or labor. In the event the defective product cannot be repaired, and a suitable replacement is not available, Lionel will 

offer to replace the product with a comparable model (

determined by Lionel LLC

), if available. In the event a comparable model 

is not available the customer will be refunded the original purchase price (requires proof of purchase from the 

Authorized Lionel 

Retailer*

 it was originally purchased). Any products on which warranty service is sought must be sent freight or postage prepaid 

(Lionel will refuse any package when postage is due).  

Transportation and shipping charges are not covered as part of 

this warranty.

 

NOTE: Products that require service that do not have a receipt from an LIONEL AUTHORIZED RETAILER* will 

be required to pay for all parts required to repair the product (labor will not incur a charge) providing the 

product is not older than 3 years from date of manufacture and is within 1 year from date of purchase. A copy 

of the original sales receipt is required. 

In no event shall Lionel LLC be held liable for incidental or consequential damages.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not 

apply to you.

This warranty gives you specific legal rights and you may have other rights which vary from state to state.

Instructions for Obtaining Service

If service for this Lionel LLC product is required; bring the item, along with your DATED sales receipt and completed warranty 

information (at the bottom of this page) to the nearest Lionel Authorized Service Station. Your nearest Lionel Service Station 

can be found by calling 1-800-4-LIONEL or by accessing the website at www.lionel.com. 

If you prefer to send your Lionel product directly to Lionel, for repair you must FIRST call 586-949-4100 extension 9105 or FAX 

Lionel at 586-949-5429 or write to Customer Service, 26750 Twenty Three Mile Road, Chesterfield, MI 48051-2493. Please have the 

6-digit Lionel product number, the date of original purchase, the dealer where the item was purchased and what seems to be the 

problem. You will receive a return authorization (RA) number to ensure your merchandise will be properly tracked and handled upon 

receipt at Lionel LLC. 

Once you have your Return Authorization (RA) number, make sure the item is packed in its original Styrofoam inner container 

which is placed inside the original outer display box (this will help prevent damage during shipping and handling). This shipment 

MUST be prepaid and we recommend that it be insured with the carrier of your choice. 

Please make sure you have followed all of the above instructions carefully before returning any merchandise for service. You may 

choose to have your product repaired by one of Lionel LLC’s Authorized Service Stations after its warranty has expired. A reasonable 

service fee should be expected once the product warranty has expired. 

Warranty Information

Please complete the information below and keep it, along with your 

DATED ORIGINAL SALES RECEIPT

. You MUST 

present this form 

AND

 your 

DATED SALES RECEIPT 

when requesting warranty service.

*A complete listing of Lionel Authorized retailers can be found by calling 1-800-4-LIONEL or by visiting our website at 

www.lionel.com. 

Products that are more than 3 years old, from date of manufacture, are not applicable for warranty coverage, even if they 

have never been sold prior to this date. (Under no circumstance shall any components or labor be provided free of charge.)

Name __________________________________________________________________________________

Address _________________________________________________________________________________

Place of Purchase  __________________________________________________________________________

Date of Purchase ___________________________________________________________________________

Product Number ___________________________________________________________________________

Product Description _________________________________________________________________________

©2009 L

IONEL

 L.L.C., U.S.A.

P

RINTED IN 

C

HINA

Содержание FM TrainMaster









































Отзывы: