Lionel FM TrainMaster, Руководство пользователя

Страница: 16 / 40

16
TrainMaster Command Control operations
CAB-1 Remote Controller numeric keypad commands
W
hen you press the
AUX1
button on your CAB-1 Remote
Controller, you turn the numeric keypad into ten command
buttons. These commands are specific to your locomotive, and an
overlay is included to help you learn these functions. After you press
the
AUX1
button, you will be able to press any numbered button until
you address a different Command Control equipped product.
The
corresponding LEGACY RailSounds sound system effects
are in bold italic type.
Stops and resets the locomotive. Resets the locomotive’s direction to
forward.
Horn blows. RPM sounds return to automatic.
Raises the volume of the LEGACY RailSounds sound system background sounds, such as RPM
sounds and let-off sounds. The horn, bell and dialog are unaffected. The default is full volume.
The volume setting is retained when track power is turned off.
Sound volume increases.
Engineer begins radio dialog, dispatcher replies (see pages 34 and 35). CrewTalk
communication.
Enters manual RPM mode and increases the RailSounds sound system RPM level (see
page 18). If the LEGACY RailSounds sound system is shut down (see
5
key below),
AUX1
,
3
activates a full LEGACY RailSounds sound system start-up while the locomotive is stopped after
pressing
AUX1
,
5
with track power on.
Lowers the volume of the LEGACY RailSounds sound system background sounds, such as RPM
sounds and let-off sounds. The horn, bell, and dialog are unaffected. The volume setting is
retained when track power is turned off.
Sound volume decreases.
Activates the LEGACY RailSounds sound system shutdown sequence when stopped. Activates the
emergency stop feature while in motion. Note that in the shutdown sequence, the smoke unit
does not turn off if it was already on. To turn off the smoke unit, press
AUX1
,
8
or use the
smoke unit SMK/NO SMK switch.
Enters manual RPM mode and lowers the LEGACY RailSounds diesel motor RPM level (see
page 18).
Dispatcher begins radio dialog, engineer replies (see pages 34 and 35).
TowerCom
announcement.
Turns off the smoke unit and the radiator fans. Air release sound.
Turns on the smoke unit and the radiator fans if the smoke unit switch is in the SMK position.
Be sure to add smoke fluid before turning on the smoke unit to prevent damage to your
locomotive. Steam generator blow-off sound.
AUX1 , 8 and 9 function only if the locomotive’s smoke unit switch is in the SMK
position. Sounds will be active in both switch positions.
Note!