Mounting the controllers
I
f you have multiple switches and controllers, you may choose to snap the interlocking
controller bases together and mount them to your control panel using screws. To join the
controller bases, snap the bases together on a flat surface as illustrated in Figure 6. Drive screws
through the holes in the controller bases to secure the controllers to your layout. We
recommend using No. 4 sheet metal screws.
7
Figure 6. Joining the controllers
Hole
Hole
Numbering your switch controllers
Y
ou may choose to number your switch controllers to help you identify the switches on your
layout. Six numbered lenses are included with your switch.
To number a switch, slide the logo lens out from under the left side of the frame, then insert
the numbered lens. Refer to Figure 7.
Figure 7. Inserting a numbered lens
Frame
Insert the lens under the frame
