Lionel Diesel with Remote Control, Руководство пользователя

Страница: 5 / 12

5
Running your locomotive
Running your locomotive
With track power unplugged, place your train set on the track.
Refer to the following section for information on coupling the cars.
2
Plug in your power supply and switch on the remote.
Your locomotive is designed to operate on 18 VDC or VAC. You may choose to
operate the train set using virtually any Lionel and Lionel-compatible alternating-current
transformer or the wall-pack power supply included with the Lionel Thomas & Friends
Remote Train Sets.
Your locomotive is compatible with most direct-current (DC) and alternating-
current (AC) transformers.
1
Note!
3
Move ‘em out!
Use your remote to run your train.
You can adjust the speed in forward or reverse,
blow the whistle, sound the bell, or trigger an announcement. Refer to page 12 for com-
plete details.
If your remote control is switched Off while the locomotive is still run-
ning, the locomotive will automatically come to a stop in 10 minutes.
To restart the locomotive, simply unplug the power cord at the terminal
section for a few moments, and then restore power to cycle the locomotive
back to normal operation. If you are done operating your trains, be sure to
unplug the wall-pack power supply from the outlet.
Switch the remote control off to conserve the batteries.
Note!
4
Unplug the wall-pack power supply when you are done running
your trains.