TrainMaster Command Control operations
Building a lash-up
T
rainMaster Command Control allows you to couple your Command Control-equipped
locomotives together, forming a multiple unit lash-up. Just like with the real railroads,
lash-ups allow you to pull longer trains and climb steeper grades. You will find that the lighting
operates prototypically—the lead unit’s headlight and interior lights are illuminated when the
train is in forward, and the rear unit’s headlight and interior lights are on when the train is in
reverse. For more information, refer to your TrainMaster Command Control manual.
To build a lash-up, assign a unique engine (
ENG
) ID# to each unit. Arrange the units on
the track and couple them together. The Command reverse unit must be set to RUN/FORWARD.
If you press a wrong button, start over with that particular unit. The assignment isn’t
saved until you press
SET
.
Start with the lead (front) unit
1. Press
TR
and enter your lash-up ID# (1-9) on your CAB-1 Remote Controller. No other lash-
up or track should share this ID#.
2. Enter the unique ID# of the lead unit.
3. Press
F
.
4. Press
SET
on the CAB-1 Remote Controller.
Add the middle units, one at a time
1. Press
TR
and enter the lash-up ID# (1-9) on your CAB-1 Remote Controller.
2. Enter the unique ID# of the middle unit.
3. Press
SET
on the CAB-1 Remote Controller.
4. Repeat these steps for any additional middle units.
The back-up light and ElectroCoupler will not operate while the unit is in a lash-up.
Address the unit using
ENG
and its unique ID# to access these features.
Complete the lash-up by adding the rear unit
1. Press
TR
and enter the lash-up ID# (1-9) on your CAB-1 Remote Controller.
2. Enter the unique ID# of the rear unit.
3. Press
R
.
4. Press
SET
on the CAB-1 Remote Controller.
You are now ready to operate your locomotive as a lash-up. Simply press
TR
and enter the
lash-up ID#, then use your CAB-1 Remote Controller to operate your locomotives. To operate an
individual unit within the lash-up, press
ENG
and enter the ID# for that particular unit.
11
Note!
Note!
