TrainMaster Command Control operations
Tuning your locomotive’s performance (continued)
SOUND LEVEL
Press
AUX1
,
1
or
4
on your CAB-1 Remote Controller to raise and lower the volume of the
background locomotive sounds, such as RPMs and air release or let-offs. The horn, bell and
dialog will be unaffected. To set the maximum volume, we recommend that you adjust your
locomotive’s volume control knob (see Figure 1 on page 7 for the location).
SETTING THE MAXIMUM SPEED
You may use your CAB-1 Remote Controller to set your locomotive’s maximum speed. This
will prevent locomotives from derailing as a result of excessive speed.
1. With the Command reverse unit switch in the RUN position, address your locomotive by
pressing
ENG
and entering the ID#.
2. Press
SET
on the CAB-1 Remote Controller. The headlight will flash.
3. Get your locomotive moving at your desired maximum speed.
4. Press
BOOST
.
The maximum speed has been set. To clear this setting, press
SET
and then
BOOST
,
holding each button for one second.
SETTING THE MINIMUM SPEED
You may use your CAB-1 Remote Controller to set your locomotive’s minimum, or stall, speed.
1. With the Command reverse unit switch in the RUN position, address your locomotive by
pressing
ENG
and entering the ID#.
2. Press
SET
on the CAB-1 Remote Controller. The headlight will flash.
3. Get your locomotive moving at your desired minimum speed.
4. Press
SET
again. The locomotive will stop.
The next time you throttle up, your locomotive will start at the speed you set. To clear this
setting, press
SET
twice, holding the button for one second each time.
21
Содержание 2551W Great NorthernFreight
Страница 35: ...Notes 35 ...
