- 28 -
2) It is recommended to leave this function in off
mode, as certain delay time is required to switch
back to recording mode and events occurred
during the delay time may be missed from
recording.
Q: How can I use the motion detection function?
A: 1) Open the motion detection menu, turn on this
function, and exit the menu.
2) Disconnect the external power supply (Powered
via the embedded battery only).
3) Restart your Car Camcorder and the recording
function will be activated automatically when any
motion in front of your car is detected.
4) Recording will be stopped in 10 sec if no motion
in front of your car is detected.
Q: Can recording continue after the memory card is
full?
A: 1) There are four options available for loop
recording: 1, 3, 5, and 10 minutes.
2) The default setup is 5 minutes. When there is
insufficient memory space left to save the
recording file, the oldest one is purged to give
space for the current one.
3) You don’t need to worry about memory space
insufficiency. This won’t happen.
