IP DVR SERVER
USER MANUAL
33
* Note
Event information included in real time image is not based on trigger system, meaning that if an
event is detected, the event information will be included in the real time image’s Header.
Action
Digital Output
Configures the length of time for digital output once event is
recognized.
Based on the moment event is recognized, gathers the pre, center
and post images of event and send via e-mail.
z
Attached, before image number: Configures the number of
pre-alarm images to be sent.
z
Attached, after image number: Configures the number of
post-alarm images to be sent.
z
Enable SMTP Authentication: If the mail server, user plans to use,
requires an authentication, this function must be activated.
(Linudix currently supports two type of SMTP authentication:
LOGIN, PLAIN)
Call URL
Enter the URL to be called upon once event is detected. Must start
with ‘http://’. (If no response over 10 seconds, it will disconnect.)
Ex) http://mysever.com/cgi/alert.cgi
FTP
Based on the event triggered moment, gathers the images from
past(before), present(center) and post(after) and send via FTP. If,
due to communication problem, there is a delay of longer than 120
seconds while transmitting data to FTP Server, it will disconnect the
communication.
z
Before image number: Configures the number of pre-alarm images
to be sent.
z
After image number: Configures the number of post-alarm images
to be sent.
z
Saved File name: Enter the file name to be used for saving. In
case of no entry, default file name of ‘image’ will be used.
z
For example, if Before Image Number is set at 3, After Image
number is set at 3 and Saved File Name is set as ‘myimage,’
following files will be transmitted to FTP server.
(assuming current time to be Sept. 1
st
, 2007, 10:20:30)
myimage20070901102030C1B2.jpg
myimage20070901102030C1B1.jpg
myimage20070901102030C1B0.jpg
myimage20070901102030C1C0.jpg (Center Image)
myimage20070901102030C1A0.jpg
myimage20070901102030C1A1.jpg
myimage20070901102030C1A2.jpg
z
Use Passive Mode: Used when can’t connect to network from
outside due to firewall.
