How To Low temperature measurements
4
3. Preparation of the Chip-DSC 100 System
3.1 Peltier system
o
Affordable and easy to use cooling option for investigations near room temperature
o
Δ
T up to 30 K below ambient temperature is possible
o
The system is already installed and can be turned on by the switch at the side of your Chip-
DSC 100
3.2 Intracooler System
o
Closed system and easy to use cooling option for investigations at lower temperatures
o
up to -99 °C at coolfinger is possible
o
insert the coolfinger carefully in the hose of the adapter in your Chip-DSC 100
o
Tighten the screw at the bottom of the cooling hose
o
Turn on the Intracooler directly at the back of the cooling system (attend the instructions of
your Intracooler)
