Linsar LS20SB-SCA, Руководство пользователя

Страница: 20 / 28

20 | BLUETOOTH
Bluetooth
®
You can listen to tracks from a media device if
connected to the soundbar via Bluetooth
® Wireless
Technology.
The first time you use your Bluetooth
®
device with
the soundbar, you will need to pair them with one
another.
Activate Bluetooth
®
on your compatible device, and
set it to search for compatible devices.
Select the speaker name: 'LS20SB-SCA' from the list
of found devices.
Note: Only one playback device can be connected to
the speaker. If the soundbar is already connected to
another playback device, the device will not appear
in the Bluetooth
®
selection list. To disconnect the
existing paired device, press and hold the button
on the remote for 3 seconds.
If your device asks for a passkey (depending on the
device manufacturers, model, and software version),
then enter digits “0000” and press OK.
Pairing Bluetooth
®
Devices
The operational range between this soundbar and
a Bluetooth
®
device is approximately 10 metres
(without any object between the Bluetooth
®
enabled device and the soundbar). Any obstacle
between the devices can reduce the operational
range.
Before you connect a Bluetooth ® enabled device
to this soundbar, ensure you know the device’s
capabilities. Compatibility with all Bluetooth
®
devices is not guaranteed.
If the signal strength is weak, your Bluetooth
®
receiver may disconnect, but it will re-enter
pairing mode automatically.
If a mobile phone on which you are playing music
receives a call, the music will be interrupted.
The phone call audio however is not played via
the speaker. Once you end the call, the devices
are connected to each other again and playback
resumes
Your device will also be disconnected when your
device is moved beyond the operational range. If
you want to reconnect your device, place it within
the operational range.
If the connection is lost, follow the instructions
(left) to pair your device to the player again.