English
- 17 -
Electronic Programme Guide (EPG)
Some, but not all channels send information about the
current and next programmes. Press the
button
to view the EPG menu.
Up/Down/Left/Right:
Navigate EPG.
OK:
Displays programme options.
:
Displays, in detail, information on the programme
selected.
GREEN:
Switches to List Schedule EPG.
YELLOW:
Switches to Timeline Schedule EPG.
BLUE:
Displays filtering options.
(RECORD): The TV will start to record the selected
progamme. You can press again to stop the recording.
IMPORTANT
: To record a programme, you should first connect
a USB disk to your TV while the TV is switched off. You should
then switch on the TV to enable the recording feature. Otherwise,
the recording feature will not be available.
Note
: Switching to a different broadcast or source is not available
during a recording.
Programme Options
In the EPG menu, press the
OK
button to enter the
Event Options
menu.
Select Channel
In the EPG menu, using this option, you can switch to
the selected channel.
Record / Delete Record Timer
After you have selected a programme in the EPG menu,
press the
OK
button and and the
Options
screen will be
displayed. Select the “
Record
” option and press the
OK
button. After this operation, a recording will be scheduled
for the selected programme.
To cancel an already set recording, highlight that
programme and press the
OK
button and select the
option “
Delete Rec. Timer
”. The recording will be
cancelled.
Set Timer / Delete Timer
After you have selected a programme in the EPG menu,
press the
OK
button and and the
Options
screen will
be displayed. Select the “
Set Timer on Event
” option
and press the
OK
button. You can set a timer for future
programmes. To cancel an already set timer, highlight
that programme and press the
OK
button. Then select
“
Delete Timer
” option. The timer will be cancelled.
Note
: It is not possible to record two channels at the same time.
Recording a Programme
IMPORTANT
: When using a new USB hard disk drive, it is
recommended that you first format the disk using your TV’s
“Format Disk” option.
To record a programme, you should first connect a USB
disk to your TV while the TV is switched off. You should
then switch on the TV to enable the recording feature.
To use the recording function, you need to connect a
USB disk or an external hard disk drive to the TV and
the connected USB disk should have at least 1 GB
capacity and should have 2.0 speed compatibility. If the
connected USB device does not support 2.0 speed, an
error message will be displayed.
Note
: Recorded programmes are saved into the connected
USB disk. If desired, you can store/copy recordings onto a
computer; however, these files will not be available to be played
on a computer. You can play the recordings only via your TV.
Note
: Lip Sync delay may occur during the timeshifting.
Radio
record is not supported
. The TV can record programmes
up to ten hours.
Recorded programmes are split into 4GB partitions.
If the writing speed of the connected USB disk is not
sufficie
nt, the recording may fail and the timeshifting
feaute may not be available.
Recordings of HD programmes can occupy more space
on the USB disk compared to SD programmes. For this
reason it is recommended to use USB hard disk drive
to record HD programmes.
Do not plug out the USB/HDD during a recording. This
may harm the connected USB/HDD.
Multipartiton support is available. A maximum of two
different partitions are supported. If the disk has more
than two partitions, a crash may occur. The first partition
of the USB disk is used for PVR ready features. It also
must be formatted as the primary partition to be used
for PVR ready features.
Some stream packets may not be recorded because
of signal problems, so sometimes the video may freeze
during playback.
Record, Play, Pause, Display (for PlayListDialog) keys
can not be used when teletext is ON. If a recording starts
from timer when teletext is ON, teletext is automatically
turned off. Also teletext usage is disabled when there
is an ongoing recording or playback.
