6
Battery Charging
Please make sure that the battery is fully charged before your first use. To charge the battery,
please connect the matching charger to a power outlet and insert the DC jack end into the
charge interface of LQ8. After a few seconds, the eXiom logo appears on the screen follow by a
picture of a battery being charged. After a few seconds the screen will go blank. While
the battery is charging, you can view the charging progress by pressing the power
button.
Once the charging is completed, please unplug the charger from LQ8 and the power supply
connection.
Power on
Hold down the power button until the eXiom logo appears on the screen.
Wait for a few seconds for the system start up to complete. Unlock the tablet to enter the
home screen.
Hibernate
Once booted up, a short press of the power button will put the LQ8 to hibernate state. During
hibernation, LQ8 will turn off the screen and enter into the standby condition, where it will
consume very little power. Another short press of power button will bring the LQ8 out of
hibernation and you can continue with your operation
