background image

Dynavector DV-505 Tone arm Instruction Manual

 

 

INDEX

 

Dynavector DV-505 tone arm has an entirely 

new concept in tone arm design. The DV-505 

is a high performance tone arm with various 

new functions that make the cartridge in use 

work the best way it can. The DV-505 user is 

requested to please read through this 

brochure to enjoy its niceties fully.

 

1.  

Foreword 

2.  

Parts illustration

 

3.  

Pre use check points

 

4.  

Application(1)

 

5.  

Application(2)

 

6.  

Arm resonance

 

7.  

Two dampers

 

8.  

Specifications

 

discontinued

1. Foreword

 

As is commonly known, a pickup cartridge generates electricity by cantilever motion relative to motion of 

cartridge proper. While cantilever stylus precisely traces signals recorded in groove of disk, cartridge proper 

receives those signals faithfully provided that it is held motionless (free of vibration). Hence, the great role of 

a tone arm. 

How should cartridge be held motionless without adverse effects on signal trackability? The DV-505 has 

solved this problem by adopting the unique (vertical/horizontal) Bi-axis system. The horizontally movable 

main arm is of sufficient weight for vibration-free operation, and the adverse effect of weight on signal 

trackability is nullified by use of an angular-radial compound bearing design. Conversely, the vertically 

movable sub-arm is made so light that it never lets the stylus jump the groove of even a disk with warp(s) 

previously unnegotiable. 

Also, the DV-505 employs a double damper method -- inertia controlled dynamic damping type plus electro-

magnetic damping type -- to introduce an ideal solution to the problem of tone arm resonance in low 

frequency range. This has generally been neglected about audio equipment that absolutely requires a flat 

frequency characteristic. 

2. Parts illustration

Содержание DV-505











Отзывы: