9
Note:
For -868Mmodel, default frequency is EU868;
For -915Mmodel, default frequency is AU915.
3.3 General Settings
Go to “Device->Setting->GeneralSettings”of ToolBox App to change the reporting interval, etc.
Parameters
Description
Reporting Interval
Reporting interval of battery level to network server. Default: 1080min
Change Password
Change the password for ToolBox App to write this device.
3.4 LoRa D2DSettings
LoRa D2D protocol is developed by Linovision and used for setting up transmission
among Linovision LoRaWAN
®
devices without gateway. When the LoRa D2D setting is enabled,
IOT-CPANEL
can work as a LoRa D2D controller for sending control commands to trigger
LoRa D2Dagent devices.
1. Enable LoRa D2Dfeature.
2. Define a unique LoRa D2D key that is the same as LoRa D2D agent devices, then