16
settings should be the same as the RS485 terminal devices.
Parameters
Description
Enable
Allow the device to collect RS485 data and upload the data.
Stop Bit
1 bit/2bit are available.
Data Bit
8 bit is available.
Parity
None, Odd and Oven are available.
Baud Rate
1200/2400/4800/9600/19200/38400/57600/115200are available.
Execution Interval
(ms)
The execution interval between each Modbus channel command.
Max Resp Time
(ms)
The maximum response time that the
IOT-C300-LORA
waits for the
reply to the command. If it does not get a response after the max
response time, it is determined that the command has timed out.
Max Retry Time
(ms)
Set the maximum retry times after device fails to read data from RS485
terminal devices.
Modbus RS485
bridgeLoRaWAN
(LoRaWAN
®
Version Only)
If this mode is enabled, the device will transmit Modbus RTU commands
from network server to RS485 terminal devices transparently and send
Modbus reply originally back to the network server.
Port:
Select from 2-84,86-223.
3. Click
to add Modbus channels, then save configurations.