5
No.
Interfaces
Functions
Upper
panel
HDMI
Synchronously output the screen image
Standard USB
Connect with USB, keyboard, mouse and otherperipherals
Square USB
Develop and debug the installation system, also can be connect with
peripherals
3.5mm headphone
jack
Android system sound output
Lower
panel
YC9 aviation plug
Connect with talkback handheld microphone
HDMI
HDMI video input port
Standard USB
Extended LinuxUSB peripherals
（
power supply is available
）
RJ45 network port
System debugging or cable video transmission
Power
Press and hold for 3s to boot, the light is bright; Press and hold for 3s
to shut, the light is twinkling.
Network
Short press to switch network connection methods(using cable
method when light is bright while using 4/3G method when light is
off)
Video recording
Short press to start/stop video recording (recording when light is
bright while stopping recording when light is off)
Alarm
Press and hold for 3s, the light is bright, device issued a warning to
the platform
PTZ
Four-dimensional rocker, control the camera to turn to the up, down,
left and right. Rotation, control the camera to zoom out or zoom in.
short press the middle button to capture the image.
TF card slot
Clamshell card slot, push to the left to open the cover, dual cards up
to 128G
SIM card slot
Clamshell card slot, push to the left to open the cover, 4 cards can be
extended
Electronic disk
mSATA electronic disk installation position
Indicator
panel
4/3G dial-up status indication, “1” indicates module number
Figure 1: dial-up success
Figure 2: idle status
Figure 3: card is not detected
Using the cable connection way, can use the cable to connect the
BGAN router to access the command center
WiFi status indiction (figure 1: not enabled. Figure 2: connection
success)
TF card status indication
Location indication (bright: locating success. Twinkling: searching
location…)
Battery indication