Installing the Linn GUI and Config application
The Linn GUI is used for operating the Sneaky Music DS system. The
Linn Config application allows you to view and configure the settings on
your Sneaky Music DS.
1.
Copy the Linn GUI and Linn Config installers from the supplied disc,
to your computer.
2.
Run both the installers. Do not launch the Linn GUI or Linn Config
at this time.
3.
The Linn GUI and Linn Config must be given firewall permissions to
allow them to operate. If the PC/laptop uses the Windows Firewall
the Linn software will be added automatically, providing you have
admin rights on the PC/laptop. If a different firewall is used, consult
the vendor’s manual for instructions on how to add the Linn software
to the list of permissions.
Note:
Each time you update to a new version of the Linn GUI or Linn Config
software, you must add the new software to non-Windows firewalls’ list of
permissions.
4.
To configure the Sneaky Music DS, follow the instructions in the
Linn Config Application
document on the supplied disc.
Now go to page 20.
2
BASIC SYSTEM INSTALLATION (continued...)
w w w. l i n n . c o . u k
SNEAKY MUSIC DS
INSTALLATION AND SETUP
9
