Linn Kremlin, Руководство пользователя, Страница: 16 / 25

16
NOTE
The stations that have previously been stored in presets will be skipped by the
autostore function.
The autostore function is terminated when either the top of the tuning range has been
reached or the highest numbered preset has been filled. The function can be
terminated by pressing
PRESET
,
TUNE
, or
SCAN
.
Press the
SIGNAL
button to display the signal strength of the current frequency. (This
function is blocked when in store mode). In this mode, the tuning can be adjusted by
pressing the
[ + ]
or
[ – ]
button in the same way as for the tune mode. After a time,
the signal strength mode is cancelled and the tuner reverts to the manual tuning mode.
The control of the audio muting and the detection of stations in the scanning and
autostore functions is determined by the mute/scan threshold. This is preset at the
factory, but can be altered by the user to allow very weak stations to be heard or to
eliminate all but the strongest stations during scan tuning.
To display and alter the threshold, first enter the signal strength mode by pressing
SIGNAL
. Release the button, then press it again and hold it until the display shows
‘th’ and a number corresponding to the threshold. Adjust the threshold using
[ + ]
or
[
– ]
button. The threshold mode will timeout automatically, or may be terminated by
pressing
SIGNAL
,
PRESET
,
STORE
,
TUNE
or
SCAN
.
Although the tuner automatically blends the stereo signal to mono at very low signal
strengths (to reduce noise), mono operation can be forced at any time by pressing the
MONO
button. The legend MONO will appear on the display. To return to normal
operation, press the
MONO
button again. In normal operation, the STEREO legend
will be shown if a stereo broadcast is received.
SIGNAL
MUTE/SCAN THRESHOLD
MONO