Linn Kremlin, Руководство пользователя, Страница: 15 / 25

15
To store a tuned frequency as a memory preset, press the
STORE
button. The
display shows the number of the lowest empty preset memory. For example, preset 7
would be shown as St 7. If desired, select another preset number by pressing the
[ + ]
or
[ – ]
button. If a
.
appears in the display (eg. St
.
7), the selected preset already has a
frequency stored. To store the current frequency in the selected preset number, press
STORE
again.
In addition to the frequency, the preset memory stores the RF input (
AERIAL
or
CABLE
) selected and the MONO/STEREO status.
To show the preset memory number in use, press the [
PRESET
button. The display
shows the number of the preset memory containing the current frequency. For
example preset 5 would be displayed as P 5. If no preset contains this frequency, the
display shows P. If all of the presets are empty, the display shows P -. Step up or down
through the presets by pressing the
[ + ]
or
[ – ]
button. Unused presets are skipped.
To clear a preset memory, press and hold the
PRESET
button until Clr appears in the
display.
To clear all of the presets, first switch off the tuner. Press and hold down the
PRESET
button. Switch on the power (still holding the button). After a short time the display will
show Clr. Keep the I ~ button pressed until the preset numbers also appear on the
display. The button may then be released. When all presets have been cleared,
normal tuner operation will be resumed.
The autostore facility combines the operations of the scan and store functions by
scanning the band from the lowest frequency to the highest, whilst automatically
storing stations in successive preset memories as they are found.
To initiate the autostore function, enter the store mode (by pressing
STORE
, as
above). Choose the preset number in which the first station will be stored by using the
[ + ]
or
[ – ]
button. Press and hold down the
STORE
button again until AS appears
in the display. As each station is found, it will be played for five seconds before it is
stored and scanning is resumed. If it is desired not to store a particular station, press
the
[ + ]
button during the five second audition period to resume scanning.
STORE
PRESET
AUTOSTORE