Installation Guide Power Supply
ENG
NTI AG / LinMot
Power range 1000 W
Page 7 / 12
5.2 Mounting
All devices can be attached to a back wall using the mounting tabs (see dimensions chapter 8). Operation in
any assembly position possible. The distance between the surrounding components and the air admission
and air exit holes should be at least 50 mm.
Please ensure that exhaust air is not immediately sucked in again.
6 Explanation of symbols
PE
Protective conductor
Do not use supply without PE connection!
L1 / L2 / L3
Mains phases
+ / -
Load connection
Relay OK/FAIL
Monitoring connections
OFF
Control connection
