Installation Guide Power Supply
DE
NTI AG / LinMot
Power range 480 W
Page 7 / 12
5.2 Mounting
It can be mounted on a 35mm mounting rail according DIN EN50022, by means
of a wall or universal bracket on a mounting plate.
There should be a distance of at least 20 mm between the air inlets and outlets
and the surrounding devices. Please ensure that the air extracted is not
immediately sucked in again.
6 Explanation of symbols
Protective Earth
Do not use supply without PE-connection!
L1 / N
Mains phase / neutral conductor
PE
Functional Earthing
+ / -
Loadoutput (Vo)
Relay OK/FAIL
Monitoring connections
Control signal OFF
External on/off
DIP - switch
Selection boost- and parallelmode
UP / DOWN - switch
Adjust the output voltage
7 Notes
7.1 DIP-switch position
