LinMot P01-48-HP-SSCP, Руководство по установке

Страница: 14 / 26

Installation Guide Linear Motors ENG
Page 14 / 26 P01-48-HP-SSCP NTI AG / LinMot
4 Electrical Connection
4.1 Motor Cable
Do not connect or disconnect motor when there is power on the servo drive.
Use only double-shielded original LinMot cable. Cables from other sources must be
checked precisely before commissioning.
Incorrect connections can destroy the drive and stator.
The stator is connected to protective earth via the motor cable. The screw connections of
C connector must be tightened up to the stop.
Three types of cables are available for linear motors. The standard motor cable is intended
for stationary installation. The High-Flex cable (suitable for trailing chains) and the robot
cable are used for moving cable applications.
4.1.1 Technical Data
Standard cable High-Flex cable Robot cable
Cable name K15-04/05 KS10-04/05 KR10-04/05
Minimum bending
radius for fixed
installation
50 mm
(2 in)
50 mm
(2 in)
50 mm
(2 in)
Minimum bending
radius when moving
Not suitable for
applications with
moving motor cable
100 mm
(4 in)
No torsion
100 mm
(4 in)
Max. torsion:
±270° pro 0.5 m
Approval UL / CSA 300V UL / CSA 300V UL / CSA 300V
Material wire insulation TPE-U TPE-E TPE-E
Material cable sheath PUR PUR PUR
Oil resistance
very good
acc. DIN VDE 0282
Part 10 + HD 22.10
very good
acc. DIN VDE 0282
Part 10 + HD 22.10
very good
acc. DIN VDE 0282
Part 10 + HD 22.10
Chemical resistance (to
acids, alkalis, solvents,
hydraulic fluid)
good good good