E1400 V2 Installation Guide
15 Declaration of Conformity CE-Marking
NTI AG /
LinMot
®
Bodenaeckerstrasse 2
8957 Spreitenbach
Switzerland
Tel.:
+41 (0)56 419 91 91
Fax:
+41 (0)56 419 91 92
declares under sole responsibility the compliance of the products:
Servo Drives of the Series E14x0-xx-QN-xS-xxx
with the
Low Voltag Directive 2014/35/EU
Applied harmonized standard:
EN 61800-5-1: 2007
Year of affixing the CE marking in accordance with the EC Low Voltage Directive:
2012
EMC Directive 2014/30/EU
Applied harmonized standards:
EN 61000-6-2: 2005 (Immunity for industrial environments)
EN 61000-6-4: 2007 (Emission for industrial environments)
EN 61326-3-2: 2008 (Functional safety)
According to the EMC directive, the listed devices are not independently operable products.
Compliance of the directive requires the correct installation of the product, the observance of specific
installation guides and product documentation. This was tested on specific system configurations.
The safety instructions of the manuals are to be considered.
These products are intended for installation in machines. Operation is prohibited until it has been
determined that the machines in which these products are to be installed, conforms to the above
mentioned EC directive.
The product must be mounted and used in strict accordance with the installation instructions
contained within the installation guide, a copy of which may be obtained from NTI AG.
Company: NTI AG
Spreitenbach, 11.04.2016
----------------------------------------------------
--------------------------------------------------------
Dr. Ronald Rohner / CEO NTI AG
Dr. Marco Hitz / Responsible for documentation
Page 26/27
www.LinMot.com
NTI AG / LinMot
®
