9
8
6. After the software has been successfully installed, the screen in Figure 4-6
will appear. Click the
Exit
button.
Proceed to “Chapter 5: Hardware Installation.”
Figure 4-6
4. If you chose
Infrastructure Mode,
go to Step 5 now. If you chose
Ad-Hoc
Mode
, select the correct operating channel for your network. The channel
you choose should match the channel set on the other devices in your wire-
less network. Then click the
Next
button.
5. The Setup Wizard will ask you to review your settings before it starts to copy
files. Click the
Next
button to save these settings, or click the
Back
button
to change any settings.
Figure 4-4
Figure 4-5