![background image](http://html1.mh-extra.com/html/linksys/wrt330n-wireless-n-gigabit-gaming-router-wireless/wrt330n-wireless-n-gigabit-gaming-router-wireless_user-manual_1924797028.webp)
22
Chapter 5: Configuring the Wireless-N Gigabit Gaming Router
The SETUP Tab - ADVANCED ROUTING
Wireless-N Gigabit Gaming Router
The SETUP Tab - ADVANCED ROUTING
NAT
If this Router is hosting your network’s connection to the Internet, select
Enabled
. If another Router exists on your
network, select
Disabled
. When the NAT setting is disabled, dynamic routing will be enabled.
Dynamic Routing
This feature enables the Router to automatically adjust to physical changes in the network’s layout and exchange
routing tables with the other router(s). The Router determines the network packets’ route based on the fewest
number of hops between the source and the destination. To use dynamic routing, select
Enabled
. Otherwise, select
Disabled
. When the NAT setting is disabled, dynamic routing will be enabled.
Static Routing
A static route is a pre-determined pathway that network information must travel to reach a specific host or
network. Use this feature to set up a static route between the Router and another network (you can have up to 20
static routes). To create a static route, alter the following settings:
Routing Entries
. Select the number of the static route from the drop-down menu.
Enter Route Name
. Enter a name for the static route, using a maximum of 25 alphanumeric characters.
Destination LAN IP
. The Destination LAN IP Address is the address of the remote network or host to which
you want to assign a static route. Enter the IP address of the host for which you wish to create a static route.
Subnet Mask
. The Subnet Mask determines which portion of a Destination IP address is the network portion,
and which portion is the host portion.
Gateway
. This is the IP address of the gateway device that allows for contact between the Router and the
remote network or host.
Interface
. Select
LAN & Wireless
or
WAN (Internet)
, depending on the location of the final destination.
Show Routing Table
. Click the
Show Routing Table
button to open a screen displaying how data is routed
through your local network. For each route, the Destination LAN IP address, Subnet Mask, Gateway, and Interface
are displayed. Click
REFRESH
to update the information. Click
CLOSE WINDOW
to exit this screen.
When you have finished making changes to the Advanced Routing screen, click
SAVE SETTINGS
to save the
changes, or click
CANCEL CHANGES
to clear all fields and start over.
Figure 5-10: SETUP Tab - ADVANCED ROUTING
Figure 5-11: Show Routing Table - Routing Table
Содержание WRT330N - Wireless-N Gigabit Gaming Router Wireless
Страница 1: ...Model No Gigabit Gaming Router Wireless N WRT330N User Guide WIRELESS GHz 2 4...
Страница 88: ...82 Appendix I Regulatory Information Wireless N Gigabit Gaming Router...
Страница 89: ...83 Appendix I Regulatory Information Wireless N Gigabit Gaming Router...
Страница 90: ...84 Appendix I Regulatory Information Wireless N Gigabit Gaming Router...