Appendix B Error Messages of Enabler Program
19
Figure 28
:
Protocol Tab
DO NOT CHANGE SETTINGS
If this check box is selected, the protocol setting is not changed when the profile is applied.
USE BELOW SETTINGS
If the
Do not change setting
check box is not selected, the protocol settings include the following pa-
rameters.
Table 10
:
Protocol Tab Description
Field
Description
Power Save Mode
Sets the power mode. Available options are Continuous Access or Max Power Save. The default set-
ting is Continuous Access.
Preamble (802.11b)
Sets the Radio Preamble to Auto, Short or Long. This option takes effect only when attaching to an
802.11b network.
Transmit Rate
The range of the data rate depends on the type of AP that the client card is connected to. The default
setting is Auto Select. MCS index will be allowed to select when the
802.11n Network
check box in the
Network Info
tab is selected.
Fragment Threshold
Sets the fragmentation threshold (the size that packets are fragmented into for transmission). The de-
fault setting is 2346.
Region Code
Sets the region code. Available options are FCC (U.S.), IC (Canada), ETSI (Europe), Spain, France,
and MKK (Japan).
RTS/CTS Threshold
Sets the packet size at which the AP issues a Request-To-Send (RTS) or Clear-to-Send (CTS) frame
before sending the packet. The default setting is 2347.
Reset
Resets the protocol settings to their default values
3.3 Site Survey Tab