![background image](http://html.mh-extra.com/html/linksys/wap54g-v2/wap54g-v2_user-manual_1925252037.webp)
31
Chapter 7: Configuring the Wireless-G Access Point
Accessing the Utility
Wireless-G Access Point
Accessing the Utility
To access the Web-based Utility of the Access Point, launch Internet Explorer or Netscape Navigator, and enter
the Access Point’s default IP address,
192.168.1.245
, in the
Address
field. Press the
Enter
key.
Open your web browser and type the IP Address you entered in the Setup Wizard. (The default IP address is
192.168.1.245.) (Should you need to learn what IP Address the Access Point presently uses, run the Setup Wizard
again. It will scan the Access Point and give you its IP Address.) Press the
Enter
key and the following screen will
appear. Leave the User Name field blank. The first time you open the Web-Based Utility, use the default password
admin
. You can set a new password from the Password tab.
static ip address:
a fixed address assigned to
a computer or device connected to a network
Figure 7-1: Password Screen