background image

21

Chapter 6: Linksys Wireless Guard
Network Access

Wireless-G Access Point

7. The Linksys Wireless Guard is successfully installed. Before you can use the program, you must restart your 

computer. Select 

Yes

 to restart your computer now. Select 

No

 to restart your computer at a later time. 

Remove any disks that are in their drives, then click 

Finish

.

8. After the Linksys Wireless Guard is installed, a key icon will be installed on the right-side of the system tray at 

the bottom of your screen. The color of the key will change with the status of the network connection. The 
most common colors are described below.

Green - Connected.

Green with Red X - Connected, but waiting for authentication.

Gray - Not connected.

Red - Connected to a network that is not protected by Linksys Wireless Guard.

Network Access

After Linksys Wireless Guard is installed, any time you access a Linksys Wireless Guard protected network, this 
screen will appear. To access your network, click

 Login as a Wireless Guard Member

, or if you are a guest, 

click 

Login as a Wireless Guard Guest

. Enter your user name and password, then click 

Login

Login as a Wireless Guard Member

. Select this option if you are a registered member.

Login as a Wireless Guard Guest

. Select this option if you are a registered guest member. The guest must first 

be added as a guest in the 

Membership and Network Administration Website

. See the Add a Guest section, 

below.

Save Password

. Select this if you want the system to remember your password so you don’t have to enter it 

when you log in.

Enable Auto Login

. Select this if you want the system to bypass the log in.

Click 

Cancel 

to cancel the login or if you forget your password, click 

Lost Password

.

Figure 6-7: Restart your Computer

Figure 6-8: The Network Access Screen

Содержание WAP54G v2







































































Отзывы: