![background image](http://html1.mh-extra.com/html/linksys/spa94x/spa94x_user-manual_1925197003.webp)
Telephone Service User Guide Linksys SPA94x 20120712.008
3
7/12/2012
Telephony Functions Linksys SPA94x - FAQ’s
Q
How do I
answer
a call?
A
Just pick up the handset when your phone is ringing.
Q
How do I
make a call
?
A
Simply lift the receiver, dial the desired number and press the button under
‘dial’ on your handset display to make the call. Alternatively you can enter #
immediately after your number to signal that the number is complete and
ready for dialing. Please note that the full area dial code is required for all
numbers dialled, even local numbers within your area code.
Note:
you do not
need to dial ‘9’ before your number.
Q
How do I use the
speaker-phone
?
A
Press the button with the speaker icon on it to activate the loudspeaker and
microphone. This button is located at the bottom right of the handset . You
can do this in place of lifting the handset to initiate or answer a call, or you can
press the speaker button at any time during a call to switch from receiver to
loud-speaker mode. When the speaker-phone has been activated you may
replace the receiver and remain in call. Pressing the speaker button with the
receiver replaced will end the call.
Q
How do I check for
Voicemail
messages…
Q1
From my phone?
A1
You can access your Voicemail box by pressing the button with the
envelope icon towards the right side of your handset
or
by dialing 1571 from
your handset. Enter your password when prompted to do so, followed by #
(default 1234). Verbal instructions accompany each selection to help you
manage your Voicemail. The red lamp at the top of your handset will light
when you have unread messages. This is also accompanied by a stuttered
dial-tone.
Q2
When I am away from my phone?
A2
You can access your Voicemail box from your mobile or any other phone
by dialing the direct number (DDI) for your line (e.g. 0207 123 4567) and
pressing the * key once you hear the greeting begin to play. Enter your
password when prompted to do so, followed by # (default 1234).
Q
How do I
mute
the-phone?
A
To disconnect the microphone on your handset temporarily whilst you are in a
call, if you want an aside with someone at your end for example, press the
button with the crossed-through microphone icon once, to the right of the
handset keypad. To re-activate the microphone press this button once again.
Q
How do I change the
volume
when I am in a call?