SPA400 Internet Telephony Gateway with 4 FXO Ports
Administration and Configuration Guide v1.0
SPA400 Internet Telephony Gateway with 4 FXO Ports – Administration and Configuration Guide v1.0
© 2006 Linksys
8
Configuring SPA400 Voicemail Accounts
The SPA400 supports up to 32 voicemail accounts providing LVS Users the ability to
receive and playback voicemail messages. Creating a voicemail account for an LVS
User requires entering a Mailbox ID in the configuration of their SPA IP Phone and then
associating it to a SPA400 Voicemail User ID.
A Voicemail User ID is defined as a valid SPA IP Phone extension that has been
configured in the SPA9000. Voicemail User IDs and passwords may be added or
changed from the SPA400 configuration utility.
From the SPA400 configuration utility, click the Setup tab and select the Voicemail Users
menu item. If the installation and configuration of the SPA400 was initially performed
using the SPA9000 Setup Wizard, each extensions configured for voicemail will be
populated in the SPA400 Voicemail Users page. By default, a user’s voicemail account
will be active with the password to access the voicemail account being identical to their
extension (i.e., ext.=100 password=100).
Figure 5: SPA400 Configuration Utility,
Setup / Voicemail Users Page
Figure 6: SPA IP Phone Configuration Utility,
Ext 1 Page
Click Save Settings at the bottom of the page and then the Restart button on the
SPA400 configuration utility. The SPA400 device will reboot. Continue to
Configuring a SPA IP Phone for Voicemail Service.
(SPA9000 IP Address)